| Specifications: |
| 1) Output range: 18-2000KVA |
| 2) Engine models: 4B3.9-G2 4BT3.9-G2 4BTA3.9-G2 6CTA8.3-G2, 6CTAA8.3-G2 6LTAA8.9-G2 MTA11-G2 MTA11-G3 |
| 3) Alternator models: |
| a) Marathon |
| b) Stamford |
| c) Engga |
| 4) Small volume, light weight, low noise, low fuel consumption, water-cooling with water tank and fan |
| water tank and fan |
| 5) Key start / auto start |
| 6) Monitoring meters and control switches |
| 7) Protection provided for short, over-current, over-speed, high water temperature, |
| and low oil pressure |
| 8) Soundproof / weatherproof canopy optional |
| 9) Standard parts: industrial type silencers, exhaust pipes, flexible exhaust bellows, |
| vibration-damping rubber, lead-acid batteries, connective cables, user manual and technical papers |
|
| Parameters: |
| 1) Rated voltage: 400 / 230V, 220/127V |
| 2) Rated frequency: 50/60Hz |
| 3) Mode of connection: 3-phase-4-line |
| 4) Rated power factor: 0.8 (lagging) |
| 5) Wave distortion: below 10% |
| 6) Power supply voltage: 24V |
| 7) Volt fluctuation: below 0.5% |
| 8) Voltage / frequency fluctuation: ≤0.5% |
|
| Features: |
| 1) Engine: |
| a) Cummins engines adopted |
| b) Multi-cylinder in-line engine, 4-stroke, direct injection |
| c) Naturally aspirated, turbocharged, water cooled or turbocharged with air |
| intercooler |
| d) B and C series mechanical governors or other electronic governors |
| e) PT fuel injection pump |
| f) Electric motor starting system |
| g) Forged steel crankshaft, cast iron cylinder and replaceable wet type cylinder |
| liner |
| h) Low discharge, and low fuel consumption |
| i) Installed conveniently and maintained easily |
|
| 2) Alternator: |
| a) Brushless, self-excited, 4-pole, single bearing |
| b) AVR self-regulated, voltage regulation rate ≤± 1% |
| c) IP21 protection grade |
| d) Class H insulation |
| e) Radio interference restraining accords with stipulation of VDE0875-N and ISO8528 |
| f) Moistureproof, sand-proof, dustproof, salt-proof and vibration-proof |
